PRO-KIT + TheBOOM! INCLUDES:
1-The BOOM! & 1-POWERCord-15' (fifteen foot USB mini cord)
1-POWERLight-SOLO the Ultimate Deck Light
1-DoubleBarrel (Double GoPro mount)
1-POWERCase (fits GoPro Hero 3, 3+ &4)
1-POWERCord-12' (4-in-1 USB standard to USB: Micro, Mini, C & Lighting)
1-Silicone Rainproof Putty
1-YOLOtek Snapback Hat
POWERStick-53" (USBx2) is what the pros use to hold & power their GoPro, VIRB, iON or any action camera. Record on your GoPro ALL DAY LONG without fear of the battery dying! Never miss with shot with POWERStick-53". Works with all 2-pin and *3-pin navigation light ports on the back or front of your boat. Securely mounts your GoPro for speeds up to **70MPH! Yes the 2-USB ports draw power from your navlight, so NEVER worry about the GoPro battery dying again. Extends from approximately 32.5" to 53" and has a ball & joint mount for many angles and points of view. Stop worrying about dead batteries on your GoPro and stop worrying about your GoPro flying off into the lake. SAVE 44%!!! IN-STOCK & SHIPPING NOW! Official Powered Mount Provider for MLF & FLW! Reg $818
WORKS WITH... EVERY GOPRO EVER MADE & EVERY OTHER ACTION CAM TOO!!!
With 1/4"-20 thread standard tripod mount on top of ALL our sticks, rest assured you can mount any action camera!
- GoPro Hero 5 Black (Yes, the brand new one. Works great!)
- GoPro Hero 5 Session
- GoPro Hero 4 Black/Silver & Hero 4 Session
- GoPro Hero 3, 3+, +, Yep, we work with your GoPro
- Works with EVERY action camera ever made! VIRB, iON, Wasp, etc.
Why is POWERStick-53" such a sought after product by everyone? Because it contains high end electronics and other features:
1) Over Voltage Protection
2) Shortage Protection
3) Over Heat Protection
4) Surge Protection
5) Over Charge Protection
...and the biggie
6) Polarity Correction (LED & USB require polarity. POWERStick-53" has a chip in it that corrects the polarity if plugged in backwards or if you buy a used boat and someone reversed the navlight wiring... POWERStick-53" just works!
7) USB 2.1 Fast Charging on top and 1.0 on bottom with USB covers when it rains***
8) Ball & Joint Mount for flexibility and lots of POV's (points of view)
9) Aircraft Grade Anodized Aluminum
10) Dual Channels for strength
11) Instant Locking Tabs to quickly adjust the heigth for each section
12) Adjustable Hand Grip - move to where you want and it stays
13) Multiple Locking Collars (Standard Cam/Non-Thread, Large Threaded & Adjustable Guide Screw for Atwood and other non-locking collar navlight ports) No matter which boat or navlight port you have, we got you covered!
14) 3-Hole Base Plug for compatibility with all 2-pin & *3-pin navlight ports
15) Spring Connectors within base plug ensure constant contact for power
*3-pin - some front navlight ports with 3-pin may need a simple rewire of the port. Just call us at 800-488-5512 and we will walk you through it.
**Threaded Locking Collar & Guide Screw NavLight Ports are rated up to 70MPH (Non-Locking Collar navlight ports - Always make sure cover is over Guide Screw to lock it down) .
**Standard/Non-Thread Locking Collar rated up to 50MPH.
**Compress sections while running.
***If you are using our Silicone Rainproof Putty, then you are fine. If you are NOT using our Silicone Rainproof Putty follow these instructions when it rains... 1) unplug all power cords, 2) close the USB covers tightly, 3) place your GoPro or other action camera into a waterproof housing, mount back on POWERStick-53" & turn off power to your navlight port. (Green light will extinguish.) Once the rain stops you may hook power up again.