Port Kit [TearDrop Perko Lg. Threaded]

Perko TearDrop NavLight Port Kit -  For Back or Front of your boat. Want to go 70MPH with your POWERStick-53"? THIS IS WHAT YOU WANT! This port has a 5 degree rake (In other words a slight tilt of 5 degrees. That means when the white anchor/running light is in, it is not straight up and down, it has a slight tilt backwards to help if you happen to glace a tree.)

Note: If you are replacing the same port it will work great. If you are installing a new port and drilling a fresh hole, it will work great. If you want to replace an existing port and it is NOT the exact as this, you will want to take out the screws and measure the hole in the boat & CONTACT us to make sure you get the right port.

Includes: 
3-stainless steel #10 oval head screws
2-crimp connectors with heat seal are included. 
*Requires a 1-5/16" hole.

Install sheet: Click here to download and print the port installation sheet with a port wire diagram, so you can lay it down on your existing port screw holes to see if they match and find the best place on your boat to install. MUST PRINT INSTALL SHEET AT 100%. (Do NOT use "Shrink to Fit" setting in .pdf)