POWERStick-53" is what the pros use to mount & provide constant power to their GoPro, VIRB, other action camera or your phone too. If you’re tired of dead GoPro batteries and looking for a mount to capture the entire scene, POWERStick-53” is here to save the day! The POWERStick 53” plugs right into your rear navlight (anchor/white light) port or your front bow light (red/green) port on your boat and requires no tools to set-up! It converts 12volt from the navlight port to 5volt USB to POWER YOUR GoPro or phone ALL DAY LONG! It also makes very little impact on your cranking battery, so no fear of that battery dying either. *Secure up to 70 MPH with threaded port or guide screw locking port. It's like having a "cameraman" on your boat... but wait there is more... using the Looping feature & Quik app with your GoPro, the videos will practically make themselves, so you can just go fishing!
The Bundle includes: 1 - QuadCord-12" (4-in-1 USB Cord) 1 - Silicone Rainproof Putty 1 - YOLOtek Truck/Boat Decal)
Official Powered Mount Provider for MLF & FLW!
USB 2.1 Fast Charging on top and 1.0 on bottom. No More Dead GoPro batteries! Perfect for Looping, the feature built-in virtually all GoPro and action cameras allows you to save only the good video. Your SD card will not fill up with video you don't want.
*Securely mounts for speeds up to 70MPH with threaded locking collar or Guide Screw Locking navlight port) Fully compress sections for high speed. NOTE: Pressure/Cam (No-Thread) ports are rated trolling only, do NOT motor. Replace Pressure/Cam (No-Thread) port with Threaded Port for motoring and high speed. Click here to learn about Attwood LightArmor Threaded Port/Collar. Available in Round, Rectangle or Teardrop.
Made of aircraft grade aluminum with dual channels for strength.
Beautifully anodized in YOLOtek green.
Extends from approximately 32.5" to 53". Compress when running.
Ball & joint mount for maximum coverage of virtually any angle and quick adjustment of point of view. (POV)
Has a 3-Hole Base Plug so it is compatible with all 2-pin and *3-pin navigation light ports on the back or front of your boat, and Spring Connectors within the base plug to ensure constant contact for power. *3-pin may need simple rewire.
Polarity Correction built-in LED & USB require polarity. POWERStick-53" has a chip in it that corrects the polarity if plugged in backwards. What this means is if you buy a used boat and someone reversed the navlight wiring, the stick fixes it and it will simply work.
Instant Locking Tabs to quickly adjust the height for each section. Compress for high speed.
Adjustable Hand Grip- Move to where you want and it stays